Sign In

Don't have an account? Create account

Must be at least 8 characters.

Already have an account? Sign In

Brick wall vinyl for printed graphics on sealed brick, blockwork, rendered and textured walls, inside or out. The film is a white matt 100 micron polymeric vinyl with an ultra tack grey adhesive, made to grab rough surfaces that ordinary vinyl simply won’t stay on.

Warmed to around 65 to 75°C as it goes on, the film softens and is pressed into the mortar lines with a channel roller, then post-heated to set it. The print covers the wall completely, the brick texture shows through, and it looks painted on rather than stuck on. The grey adhesive stops the colour of the brick changing your colours. It’s a quick way to brand reception walls, retail and hospitality interiors, warehouse walls and exterior gable ends without signwriting.

We print in-house and add a matt or gloss laminate for protection. One piece goes up to 1570mm wide and 50m long; bigger walls are made as panels that butt together. Fitting needs a heat gun and some care: heat it in, don’t stretch it, or it will lift.

Rated up to 7 years outdoors unprinted. Apply between 10 and 50°C to a clean, dry, sealed surface. This vinyl is for walls, not floors or pavements. Fire: B-s1, d0 to EN 13501-1 when applied to brick, block, plasterboard or similar non-combustible walls 12mm or thicker. Floors are excluded. The classification report is under Downloads.

Need something different? High tack air release vinyl for smooth sealed walls, or Easy Dot white for indoor wall graphics that need to come down cleanly.

This magnetic sheet is thinner than the vehicle grade magnetic and is better suited to internal uses, such as fridge magnetics or retail environments.

 

Vehicle-grade magnetic sheet is heavier than usual and has a stronger magnetic pull. This makes it suitable for use on vehicles. Its ideal for temporary van and car signage. These magnetics come a with vinyl mount and a choice of Matt or Gloss Laminate.

Matt white vinyl printing for everyday signs, panels, labels and stickers. The film is a 100 micron monomeric vinyl with a permanent clear adhesive, in a matt white that stops glare under shop lighting, in shop windows and on camera.

It’s a promotional-grade film made for flat surfaces and print-and-cut work: point of sale, panel graphics, labels, wall signs and short to medium term outdoor jobs. It goes on wet or dry, which helps when lining up larger pieces.

We print in-house on Latex or UV gel and cut on our Kongsberg: square, circle, radius or any shape, or kiss cut into matt vinyl stickers on the backing sheet. Add a matt, gloss, dry wipe or anti-graffiti laminate for wear and cleaning. One piece goes up to 1490mm wide and 50m long; bigger graphics are made as panels that butt together.

Rated up to 4 years outdoors unprinted. Not for polypropylene or other low-energy plastics. Fire: B-s1, d0 to EN 13501-1 when applied to plasterboard or a similar non-combustible board 12mm or thicker, tested without laminate. It isn’t classified on thinner glass, metal or plastics. The classification report is under Downloads.

Need something different? Matt white high tack vinyl for plastics, grey back vinyl to cover old graphics, or removable vinyl for short-term displays.

Grey back vinyl printing for covering what’s already there. The film is a white gloss 70 micron polymeric vinyl with a grey permanent adhesive, so old graphics, logos and strong base colours don’t show through your new print.

It’s the vinyl to choose when rebranding vans, signs and panels without stripping them first, or when your graphic goes onto a dark or patterned surface. It suits flat panels and simple curves, including vehicle graphics, and goes on wet or dry.

We print in-house on Latex or UV gel and cut on our Kongsberg: square, circle, radius or any shape, or kiss cut on the backing sheet. Add a laminate for wear and cleaning. One piece goes up to 1570mm wide and 50m long; bigger graphics are made as panels that butt together.

Rated up to 5 years outdoors unprinted. Not for polypropylene or other low-energy plastics. Fire: B-s1, d0 to EN 13501-1 when applied to plasterboard or a similar non-combustible board 12mm or thicker, tested without laminate. It isn’t classified on thinner glass, metal or plastics. The classification report is under Downloads.

Need something different? Grey back air release vinyl for bubble-free fitting on big panels, or vehicle wrap vinyl for curves, rivets and full wraps.

Vehicle wrap vinyl printed in full colour for vans, cars, trailers and fleet graphics. We use a premium 50 micron cast wrap film with an air release adhesive, laminated with its matched overlaminate, so it stretches into curves, recesses, rivets and corrugated panels and stays there.

Cast film doesn’t shrink back the way cheaper calendered vinyl does, which is what keeps edges down on curved bodywork. The air release channels let fitters slide, lift and squeegee out bubbles, and the grey tie coat keeps the white solid over coloured paint. When the livery changes, it comes off cleanly with heat.

We print in-house on Latex and laminate in gloss or matt. One piece goes up to 1490mm wide and 50m long; whole wraps are made as panels to your template.

Rated up to 10 years unprinted on vertical surfaces. Apply above 10°C to cured factory paint; not to fresh or resprayed paint, rubber or unpainted plastic. Fire: B-s1, d0 to EN 13501-1 as a vehicle wrap on a non-combustible substrate. Ask us for the classification report.

Need something different? Grey back air release vinyl for flat van panels, or high tack vinyl for plastic signs.

Grey back air release vinyl for large graphics over old signs, liveries and dark surfaces. The film is a white gloss 70 micron polymeric vinyl with a grey permanent adhesive that stops what’s underneath from showing through.

The adhesive has air release channels, so trapped air pushes out under a squeegee and big panels go on without bubbles. It’s a faster, cleaner fit for van sides, fascias and hoardings than standard grey back vinyl, and it suits flat panels and simple curves.

We print in-house on Latex or UV gel and cut on our Kongsberg: square, circle, radius or any shape, or kiss cut on the backing sheet. Add a laminate for wear and cleaning. One piece goes up to 1570mm wide and 50m long; bigger graphics are made as panels that butt together.

Rated up to 5 years outdoors unprinted. Not for polypropylene or other low-energy plastics. Fire: B-s1, d0 to EN 13501-1 when applied to plasterboard or a similar non-combustible board 12mm or thicker, tested without laminate. It isn’t classified on thinner glass, metal or plastics. The classification report is under Downloads.

Need something different? Grey back vinyl for smaller jobs, or vehicle wrap vinyl for curves, rivets and full wraps.

Removable vinyl printing for promotions, events and seasonal graphics that have to come down cleanly. The film is a matt white monomeric vinyl with a removable adhesive that holds firmly while it’s up and peels away without leaving glue behind.

The adhesive has air release channels, so trapped air pushes out under a squeegee and graphics go on smoothly first time, even across a big window or wall. It’s applied dry.

We print in-house on Latex or UV gel and cut on our Kongsberg: square, circle, radius or any shape, or kiss cut into removable stickers on the backing sheet. Add a laminate for wear or cleaning. One piece goes up to 1490mm wide and 50m long; bigger graphics are made as panels that butt together.

Removes cleanly for up to 6 months outdoors. Suits glass, painted walls, metal and gloss panels, but not polypropylene or other low-energy plastics. Fire: the maker describes the film as self-extinguishing but gives no fire classification, so it’s not fire rated.

Need something different? Easy Dot white if it needs to be repositioned, clear self cling for glass with no adhesive at all, or matt white vinyl for a permanent job.

A Clear, low tack vinyl think old school Tax Discs! Easy application and removal by end user, eliminating the need for professional installation. Perfect for temporary indoor signage on windows and other smooth surfaces. Printed using either a UV or a Latex Printer.

High tack vinyl printing for the surfaces ordinary vinyl struggles to grip: smooth low-energy plastics such as polyethylene, plastic signboards and casings, and smooth sealed interior walls. The film is a white gloss 70 micron polymeric vinyl with a high tack permanent adhesive that bites harder from the first touch.

The adhesive has air release channels, so trapped air pushes out under a squeegee and large graphics go on without bubbles, and without slitting or pinning. That makes it a good choice for big wall and panel graphics fitted by your own team.

We print in-house on Latex or UV gel and cut on our Kongsberg: square, circle, radius or any shape, or kiss cut into high tack stickers on the backing sheet. Add a matt, gloss, dry wipe or anti-graffiti laminate for wear and cleaning. One piece goes up to 1570mm wide and 50m long; bigger graphics are made as panels that butt together.

Rated up to 7 years outdoors unprinted. It suits flat or gently curved surfaces but not rivets or deep recesses, and it goes on dry only. Fire: B-s1, d0 to EN 13501-1 when applied to plasterboard or a similar non-combustible board 12mm or thicker, tested without laminate. It isn’t classified on thinner glass, metal or plastics. The classification report is under Downloads.

Need something different? Matt white high tack vinyl for a non-reflective finish, MetaGrab wall vinyl for brick and rough walls, or removable air release vinyl for graphics that come off cleanly.

Matt white high tack vinyl for labels, panels and signs that have to stick to awkward plastics. The film is a 100 micron monomeric vinyl in a non-reflective matt white, with a high tack permanent adhesive made for smooth low-energy surfaces such as polypropylene, polyethylene and ABS.

The matt face means no glare under shop lights or in photos, and it takes a clean, flat print. It’s a promotional-grade film, best for flat panels and print-and-cut labels on short to medium term jobs rather than long outdoor runs.

We print in-house on Latex or UV gel and cut on our Kongsberg: square, circle, radius or any shape, or kiss cut into matt stickers on the backing sheet. Add a laminate if it needs to stand up to handling or cleaning. One piece goes up to 1570mm wide and 50m long; bigger graphics are made as panels that butt together.

Rated up to 4 years outdoors unprinted. Best on flat surfaces; not for rivets or complex recesses. Fire: B-s1, d0 to EN 13501-1 when applied to plasterboard or a similar non-combustible board 12mm or thicker, tested without laminate. It isn’t classified on thinner glass, metal or plastics. The classification report is under Downloads.

Need something different? Matt white vinyl with a standard adhesive, high tack air release vinyl for bubble-free fitting on big graphics, or grey back vinyl to hide what’s underneath.

The Classic Swinger is an environmentally friendly pavement sign designed for businesses seeking a cost-effective and sustainable way to attract customers. Its sturdy steel frame and recycled PVC base provide excellent stability, while the swinging panel enhances wind resistance, making it ideal for outdoor use in busy high streets, forecourts, and cafés. With a simple yet effective design, it offers an easily interchangeable display area for promotions, branding, or directional signage. Lightweight yet durable, the Classic Swinger is quick to assemble and update, ensuring your messaging stays fresh while minimizing environmental impact.

You have 0 items in your basket

Your basket is empty.